tams elektronik 53-03110, Руководство пользователя

Страница: 4 / 25

!
English WIB-31 | WIB-32 | WIB-33
1. Getting started
How to use this manual
This manual gives step-by-step instructions for safe and correct fitting and
connecting of the module, and operation. Before you start, we advise you
to read the whole manual, particularly the chapter on safety instructions
and the checklist for trouble shooting. You will then know where to take
care and how to prevent mistakes which take a lot of effort to correct.
Keep this manual safely so that you can solve problems in the future. If
you pass the module on to another person, please pass on the manual
with it.
Intended use
The carriage ligthings are designed to be operated according to the
instructions in this manual in model building and with model railways.
Any other use is inappropriate and invalidates any guarantees.
The carriage ligthings should not be mounted by children under the age
of 14.
Reading, understanding and following the instructions in this manual
are mandatory for the user.
Caution :
Integrated circuits (ICs) are inserted on the module. They are
sensitive to static electricity. Do not touch components without first
discharging yourself. Touching a radiator or other grounded metal part
will discharge you.
Checking the package contents
Please make sure that your package contains:

one or six carriage lightings,

one or six light dependent resistors,

two or twelve red LEDs,

one manual.
Required materials
For connecting the carriage ligthing you need:

an electronic soldering iron (max. 30 Watt) or a regulated soldering
iron with a fine tip and a soldering iron stand,

a tip-cleaning sponge,

a heat-resistant mat,

a small side cutter and wire stripper,

as necessary a pair of tweezers and long nose pliers,

electronic tin solder (0,5 mm. Diameter),

wire (diameter: > 0,05 mm² for all connections).
If you intend to shorten the module: a small metal saw.
If necessary, for the external power supply of the LEDs:

an electrolytic capacitor with a voltage sustaining capability of > 16 V or

two goldcaps with a voltage sustaining capability of > 5,5 V.
If necessary, for the external power supply of the decoder´s function
outputs: an electrolytic capacitor with a voltage sustaining capability of
> 25 V or > 35 V (when connecting it to analogue a.c. voltage).
If necessary, a rectifier (see section 6, connecting part 2).
Page 24
tams elektronik