Setting up Image
40
Output
setting
I/O1
To output a signal when an event has occurred, turn
ON the check box and set the make/break status for an
operation of output signal 1.
Note:
The make/break status outputs the following signal
operation.
make
Active LOW
break
Active HIGH
If I/O1 is specified as output, I/O1 cannot be used for
a trigger.
•
•
I/O
To output a signal when an event has occurred, turn
ON the check box and set the make/break status for an
operation of output signal .
Note:
The make/break status outputs the following signal
operation.
make
Active LOW
break
Active HIGH
If I/O is specified as a trigger, I/O cannot be used
for output.
•
•
To send a mail when an event has occurred, turn ON the
check box and set the mail address of the destination.
Note:
Make mail settings in the mail setting part in the [Net-
work] settings screen.
Audio OUT
To output an alarm sound from the camera lineout (audio
output jack) when an event has occurred, turn ON the
check box.
Note:
I/O1, I/O, MD, Audio OUT can be selected at the same time as output.
