Tamron 180-View 180NT-P-CM, Руководство пользователя

Страница: 35 / 39

Configuring the Camera and Image Settings
15
Tour speed Speed at which modes are switched. The
larger the numeric value, the faster the speed.
x1 - x10
4
Motion Detection Tour Program
Configure the motion detection feature.
Setting Details Range of Values
No. 1 - No. Specify the area number for the [Motion Detec -
tion Tour] in Mode Setting. The areas that can
be specified are as follows.
1
[Example] When the area settings are as fol -
lows: No. 1 = 1, No. 2 = 2, No. 3 = 3, and No. 4
= 4, the display order is No. 1 → No. 2 → No.
3 → No. 4 → No. 1 →..., and the order of area
display is the setting that was entered (→ page
12), 1 → 2 → 3 → 4 → 1...
1 -
Area Number Set the maximum number of tour user area. -
Dwell Time Time required when switching areas. The
smaller the numeric value, the faster the speed.
x1 - x10
Dwell Time After
Detection
When a moving object is detected in an area,
the view switches to display the image in that
area for the duration specified here.
1s - 10s
Detection Sensi -
tivity
(high 1 - low 10)
Set the sensitivity of motion detection. Decreas -
ing the numeric value increases the sensitivity,
and increasing the numeric value decreases
the sensitivity.
Note:
If you set this numeric value too low, the
sensitivity may increase too much and lead
to more false detections.
•
Level 1 - Level 10
Motion Detection
Window
Set whether or not to display a frame around
the subject when a motion is detected.
ON, OFF