3
Thank you for choosing TCC-1655HC Laminator. It has been designed and manufac-
tured to provide years of continuous use. For complete operating and maintenance
information, please read this manual thoroughly. Upon receipt for the laminator,
please inspect the box, machine, and all other contents for shipping damage. Any
damage/s should be brought to the immediate attention of the delivery carrier.
Failure to comply with any of the following safety procedures could
result in serious injury. Please read the instructions carefully and
keep this manual for future reference.
1. A licensed electrician should install the proper outlet for the wiring of the
machine.
2. Ensure that the unit is plugged into a properly grounded outlet with correct
voltage.
3. Do not allow articles of clothing (ties, scarves, etc.) near the machine open-
ings as they could get caught by the rollers and pulled inside causing seri-
ous personal injury.
4. Keep machine away from anything flammable and install in a dry location.
5. To prevent the possibility of electric shock, do not immerse machine in wa-
ter or allow liquid to spill inside.
6. Avoid excessive sunlight, humidity and extreme temperatures.
7. Ensure that the machine is turned off, has cooled down and unplugged from
the outlet prior to moving or performing repairs.
8. Keep away from children.
9. Do not open the case without being authorized by a technician.
10. Do not attempt to laminate items that exceed total recommended material
thickness for the unit.
WARNING: The laminator should be installed by a trained service
technician
The laminator comes fully assembled, except for the guide table to avoid shipping
damage. Upon arrival, thoroughly inspect the unit. It is imperative that any ship-
ping damage is reported and a claim is filed with the delivering carrier immediately
upon receipt.
The laminator should be located in an area with adequate work space for feeding
graphics and laminating materials. Avoid placing the laminator in a dusty area or
near sources of extreme heat or cold. Once the laminator is in the right place, lock
the casters into position. Always unlock the casters when moving to a different
location.
INTRODUCTION
SAFETY PRECAUTIONS
INSTALLATION
Содержание TCC-1655HC
Страница 9: ...9...
