Z-Block Manual version 1.3
Page 14
Tamas Hydronic Systems
End Cap Installation
Autovent Installation
Apply a pea-sized amount of Silicon
Grease to O-Rings on Autovent.
A line film of lubrication
can avoid rolling the O-ring.
1
Push firmly in the vertical direction until
it reaches the end stop in the Z-Block.
2
3
Push and twist Air Vent clockwise to
seal the connection.
Apply a pea-sized amount of Silicon
Grease to O-Rings on End Cap.
A line film of lubrication
can avoid rolling the O-ring.
1
Push End Cap firmly in the axial direction
until it reaches the end stop in the Z-Block
2
3
When connected, turn both levers on
fittings up or down to lock and seal
Assembly
