Z-Block Manual version 1.3
Page 12
Tamas Hydronic Systems
CLIENT:
Date
Checked:
Drawan:
Fernando
Tom
Tom
19/004/2017
19/04/2017
19/04/2017
Size
B
DWG.
No.
Scale:
Rev.
1
3
Sheet 1 of 1
Low Temp. Zones
Approvals
Approved:
Proprietary Information:
The information contained in this document is the property of Thamas hydronic Systems
Inc. except as specifically authorized in writing Tamas Hydronic Systems Inc. The holder
document:
(1) Shall keep all information contained herein confidential and shall protect same in
whole or in part from disclosure and dissemination to all third parties.
(2) Shall use same for operation and maintenance purposes only.
Supply Return
4) Vertical Arrangement
The Z-Block can be installed in a vertical configuration. When installing multiple
Z-Block modules vertically, the sensor & vent fitting (Part#025-0021) for the air
vent must be installed on the topmost end cap.
Applications
Zone Pumps
