4516 112 Ave S.E. Calgary,
Alberta •
Te
l: (403) 279 0020 •
Fax: (403) 279 0747
www.tamashydronic.com
Page 4
Tamas Hydronic Panels
Low Loss Header Series
Overview, Options and Dimensions
Description
When used in conjunction with boilers, the low-loss header
acts as hydraulic break, decoupling boiler and system
circuits from each other. The low-loss header increases
operational efficiency. In addition, the low-loss header
helps eliminate debris from the heating system. The low
loss header panel is configured with expansion ports
designed to accept input signals from future auxiliary
panel. The panel is designed to hydronically isolate the
primary boiler loop from the secondary zone loop.
Optional secondary injection mixing components, as well
as low and high temperature zones can be added to the
system. This enables the panel to accommodate DHW
priority or fan coil applications. The panel can support a
maximum of 5 pumps, including the DHW priority pump.
Installation
Prior to mounting the panel, ensure the wall is capable of
supporting the weight of the panel. Ensure that an 115V
receptacle is within reach of the 5-foot cord and plug.
Main Features
• Pre-designed and assembled
• Function & pressure tested
• Packaged, compact design
• Certified to CSA C22.2 No. 14-95
• Conforms to UL Standard 598A
Technical Data
•
Flow Range: 0-17 US GPM
•
Head Range: 0-19 Feet
•
Motors: 2 Pole, Single Phase
• Max. Operating Temperature: 93°C/200°F
• Max. Ambient Temperature: 49°C/120°F
• Max. Operating Pressure: 10 Bar/145 PSI
Low Loss Header Panel
T-LL-00-1400 Model Shown
Low Loss Header Expansion Panel
T-LL-EX-0120 Model Shown
Low Loss Header Boiler Panel
T-LL-BD-2110 Model Shown
Introduction
