Talovahti 66A, Руководство пользователя, Страница: 8 / 16

DYGSM Alarm System User Manual
—————————————————————————————————————
7
———————————————————————————————————————
a).Works for Door Sensors Only;
b).After Enabling the Function, You will have to Press & Hold the [Out Arm] or [Home Arm] button for 3 seconds to arm the system if any Door/Window is open.
Otherwise, you can not Arm the system;
c).For sure, you can arm the system easily without enabling the function.
①
In setup state,
→
Select [Sensors]
→
Select [ENTER]
②
Select [Edit]
→
Select [ENTER]
③
Select [Auto Search Sensor]
→
Select [ENTER]
→
Triggering the Door Sensor you would like to Enable the function
→
Select [ENTER] when the Sensor’s
name displays on the Host screen;
④
Select [DOWN]
→
Select [Chime Zone]
→
Select [ENTER]
⑤
Select [UP]
→
Select [Yes]
→
Select
【
SAVE
】 →
Enable the Auto Search Sensor successfully when you see the
【 √ 】
on The Host Screen
⑥
Select
【
BACK
】
to Exit.
7. Query the IMIE Code
①
In Setup state
→
Select [Down]
→
Select [System About]
→
Select [ENTER]
②
Select[DOWN]
→
Select [IMEI]
→
Select [ENTER]
③
IMIE Code[15 digitals] will display on the Screen.
8. How To Use the CID Function?
The Standard ADMECO Contact ID Protocol was used in the Alarm System.
Firstly, You need to get a telephone number & User ID from your Service Provider .
www.deltasecurity.cn