
DYGSM Alarm System User Manual
—————————————————————————————————————
10
———————————————————————————————————————
Press
(Arm
)
to arm the alarm panel and the LED indicator lights on (siren hoots once), the system enters Arm state.
If there comes an intruder, the siren will hoot to deter the intruder.(The siren turns off after ringing for 5 minutes as default setting.) At the same time, the system dials
the pre-stored phone numbers automatically.
Press
(Disarm
)
to disarm the alarm panel and the LED indicator blacks out (siren hoots twice), the system is disarmed.
When intruders are detected, siren will keep hooting. Press
(Disarm
)
to stop siren hooting.
Press
(Arm
)
button on the remote control, the system state LED is on. All the sensors in other zones are armed except the motion detector in Home Mode Zone
which is disarmed so that user can move freely at home.
No matter what state the control panel is in, once SOS button on the remote control is pressed, the system immediately goes into emergent alarming state.
2.
Wireless Door/Window Contact
Features
The is a Door/Window Contact that can be installed on doors, windows, and any other objects that open and close. The sensor transmits signals to the control panel
www.deltasecurity.cn