Quick start guide
Settings
27
ENGL
ISH
Setting the first printing line
(TOF)
You can use the TOF function for setting the position of the first printing line for
each paper source and each menu individually.
Before using the TOF function (if fanfold paper is used), you first have to set the
tear position (see above).
Swing the soundproofing cover towards the front (see “Printer at a glance”,
page 5).
Press the
Setup
key. The printer changes to setup mode.
Press the
Adjust
(2) key.
Press the
TOF
(3) key.
The paper is fed to the position where the bottom edge of the
first printing line
A
is aligned with the tear edge
B
of the
printer. The factory setting for the first printing position
(TOF) is 12/72". This is equivalent to the second line from
the top.
Press the
<
(2) or
>
(3) key to move the first printing line to the desired position.
You can set values from 0 to 220/72" for fanfold paper or for single sheets.
12/72" corresponds to a printing line.
Adjust
Paprpath
Menu
Char
Online
Setup
2
1
3
4
TOF
Head
Tear
Online
Setup
2
1
3
4
Co
m p
ute
rd
ru
ck
er
Computerdrucker
A
B
FormAdj= 12/72"*
Set < > Exit
Online
Setup
2
1
3
4
Quick Start-en.fm Seite 27 Donnerstag, 17. Juni 2004 9:36 09