Impostazioni
Guida di avvio rapida
26
Impostazioni
Questa sezione descrive come impostare la posizione di strappo, la riga di inizio
stampa, la distanza della testina di stampa, il font e la densit dei caratteri.
Impostazione della
posizione di strappo
Se la posizione di strappo della carta non corrisponde al bordo di strappo della
stampante, la si può regolare. Se necessario, la carta inserita deve essere strappata
e riportata in posizione di parcheggio.
Premere il tasto
Setup
. La stampante si commuta nel modo Setup.
Premere il tasto
Regolaz
(2).
Premere il tasto
Stp.
(4).
Richiudere il calotta insonorizzante (vedere “Configurazione della stampante”,
pagina 5). La posizione di strappo si trova sul lato anteriore dell’uscita della carta.
Premendo il tasto
<
(2) o
>
(3), posizionare la perforazione come desiderato. Con-
fermare con il tasto
OK
(1).
Confermare premendo il tasto
Setup
. La stampante torna nella posizione di riposo.
La correzione impostata – max. circa 2,5 cm (1") in ogni direzione – resta in me-
moria anche allo spegnimento della stampante. Tale correzione può essere impo-
stata separatamente per ogni percorso carta.
Regolaz Dir.Cart
Menu
Char
Online
Setup
2
1
3
4
TOF
Test. Stp.
Online
Setup
2
1
3
4
Reg Stp= 00/72"*
OK < > Esci
Online
Setup
2
1
3
4
Quick Start-it.fm Seite 26 Donnerstag, 17. Juni 2004 9:40 09