Quick start guide
Paper handling
19
ENGL
ISH
Changing the paper type in the
Setup menu
When you want to change the paper source in the Setup menu, proceed as follows:
■
Press the
Setup
key, then the
Paprpath
key (3).
■
Select the desired paper path by pressing
<
(2) or
>
(3).
■
Confirm the selection by pressing the
Set
key (1).
Loading paper
Your printer can process both fanfold paper and single sheets. For information on
the supported paper sizes, please refer to page 32 (“Paper specifications”).
Only use dust-free or low-dust paper. Many paper qualities are suitable for this
printer. For more information, please refer to the User guide on the Online CD-
ROM.
Fanfold paper
Make sure that the printer is set for fanfold paper printing. If
necessary, change the paper type (see “Changing the paper
type”, page 18).
Raise the front cover.
Remove the bottom cover
A
.
Open the right and left tractor flaps.
A
Quick Start-en.fm Seite 19 Donnerstag, 17. Juni 2004 9:36 09
