TallyGenicom 2440, Руководство пользователя

Страница: 64 / 150

Set-Up mode Special mode
4-18
Recalling Factory Settings (RCALL-FACT)
Factory settings are those settings pre-selected at the factory. To recall (reset) the factory
settings, select the RCALL-FACT function and press the
FF/LOAD / Micro Feed Up /
X key. After that select the SAVE&EXIT function and press the SEL / MENU / EXIT
key.
Options under the Set-Up and Adjustment functions are all initialized to the factory
settings.
Saving and Exiting
To exit the set-up mode and save your setting, first select the SAVE&EXIT function and
then press the
SEL / MENU / EXIT key.
Any settings changed while in the Set-Up mode are saved as the new power-on defaults
for the printer. The new defaults remain active until you change them again.