TallyGenicom 2265+, Быстрый старт

Страница: 18 / 32

➤
Loading paper
Your printer can process both fanfold paper and single sheets. For information on the supported
paper sizes, please refer to page 27 (
Paper specifications ).
You should only use those paper types which are approved for this printer. For more informa-
tion, please refer to the User Guide on the Online CD-ROM.
The printer by default is adjusted in such a way, that it will automatically check the width of
the inserted paper before starting a print job. If the paper couldn’t be detected (for example
because it is positioned too far left), the message "PW sensor defect" appears in the display, it
is impossible to print.
If a printing line overrides the measured paper width, the characters out of range will not be
printed and the message "Paperwidth error" appears in the display. The printer switches to offline
mode. You can restart the printing process by pressing the Online key.
For further information on paper width measurment, please refer to the User Guide on the
Online CD-ROM.
Fanfold paper
Make sure that the printer is set for fanfold paper printing. If
necessary, change the paper type (see page 15,
Changing the
paper type ).
Raise the front cover.
Remove the bottom cover A .
Open the right and left tractor flaps.
A
Not available on some printer types.
Paper handling Quick start guide
16