Tally Dascom DL-210, Руководство по обслуживанию, Страница: 11 / 62

5
1.4 Error Table
LEDs LEDs’ behavior Status
Power
On ○ Power on.
Off ● Error or power off.
Status
On ○ Paper end.
Off ● Normal.
Fast blink ○●○●○●○ Label remains in peeler.
Slow blink ○●●○●●○ Ribbon end.
Error
On ○
Print head mechanism is
opened.
Off ● Normal.
Fast blink ○●○●○●○ Print head is over-heated.
Part Two Firmware Update
2.1 Update firmware via USB
Dascom is not liable if customers are doing a firmware update by
themselves. If power is switched off during the process, the printer may be
damaged afterwards.
(1) Preparation
USB cable, 24V power adapter, DL-210 setup tool, firmware file.
(2) Connection
Connect printer and host with USB cable firmly. Check the Device Manager, if connection
is successful, “USB printing support” will display under “universal serial Bus Controllers”
directory. Otherwise, please check the connection between printer and USB interface,
please check whether the Driver installation is successful or not.