W W W . T A L K S W I T C H . C O M
1 5
SETUP COMPLETE
Congratulations!
Your TalkSwitch system should now be ready to accept incoming calls.
TIP:
Put a TalkSwitch Quick Reference Card next to each extension phone to help
employees become familiar with the TalkSwitch features.
Configuring TalkSwitch units remotely
Once installation is complete, you can configure your TalkSwitch units via a TCP/
IP connection between TalkSwitch and a remote PC running the TalkSwitch
configuration software. For details, refer to the
TalkSwitch User Guide
.
Note:
The TalkSwitch 24-CA model does not have a network connection option
and cannot be configured remotely.
Note:
If TalkSwitch is installed behind a router/firewall, you will need to map
port 9393 to TalkSwitch to enable remote configuration (for details on port
mapping, visit http://www.portforward.com/routers.htm).
What next
•
To add remote extensions (e.g. cell phone or remote location) or take
advantage of other TalkSwitch features, refer to the
TalkSwitch User Guide
.
•
To configure your TalkSwitch 48-CVA (or upgraded 48-CA) system to use VoIP,
refer to the
TalkSwitch VoIP Network Configuration Guide
.
We trust that your
TalkSwitch phone system
will provide exceptional features,
performance and value to your business. Should you have any further questions,
please contact your authorized TalkSwitch reseller. If you purchased directly
from TalkSwitch, visit
www.talkswitch.com/support
or call
1.866.393.9960
(North America).
We welcome your feedback, comments and suggestions. Please e-mail us at
or write us at
TalkSwitch, 1545 Carling Avenue,
Suite 510, Ottawa, ON Canada K1Z 8P9
.
Thank you for choosing TalkSwitch.
