W W W . T A L K S W I T C H . C O M
1 1
Take note of which telephone is connected to which jack and refer to the table below
for corresponding extension numbers. For systems with multiple TalkSwitch 48 units,
refer to the
Networking TalkSwitch on a LAN
section on page 13 for further details.
Connect an audio source (optional)
There are two ways to add Music on Hold to
your system.
A) External Audio Source
To play music while on hold, connect a
1/8" (3.5 mm) mono phono connector
cable from an audio source such as a CD
player, tape player, or sound card to the
music jack of the TalkSwitch unit.
If you have a system with multiple TalkSwitch units, you will need to provide
audio to the music jacks of each unit.
B) Internal Music File
TalkSwitch can play a digital audio file (.wav format). For complete details, refer
to the
TalkSwitch User Guide
.
Connect to a Public Address (PA) System (optional)
To make announcements over a Public Address (PA) system from a TalkSwitch
extension, connect a 1/8" (3.5 mm) mono phone connector cable from the
TalkSwitch
PA
jack to the
input
of the PA system.
For complete details, refer to the
TalkSwitch User Guide
.
8-extension units
4-extension units
TalkSwitch phone jack
E1
E2
E3
E4
E5
E6
E7
E8
Extension number (single
unit systems; unit ID = 1)
111
112
113
114
115
116
117
118
MUSIC
