Area of Rescue Command Unit
Installation Guide
Model AOR-8 / Model AOR-16
Page
6
of
10
Rev. 6/28/2017
Copyright 2017 Talk-A-Phone Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Talkaphone, Scream Alert, WEBS, and WEBS Contact are registered trademarks of Talk-A-
Phone Co. All rights reserved. All other trademarks mentioned in this document or website are the property of their respective owners and does not imply or indicate any
approval, endorsement, sponsorship, or affiliation with such owners unless such approval, endorsement, sponsorship, or affiliation is expressly indicated.
V.
Programming Instructions
To program the
AOR-8 / AOR-16
unit, each bank of eight (8) Talkaphone Analog Call Stations must
have their own internal consolidator programmed. To program each internal consolidator, call it by
either dialing the phone numb
er of the line connected to that bank’s
Telco
“
IN
” port or by lifting the
selecting the appropriate line of the built-in handset. In either case, the consolidator will respond
with three beeps. Each consolidator will respond to all programming requests in one of two ways:
1 Beep
Command completed successfully
2 Beeps
Error(s) detected
If you hear two beeps, enter the code again. If you hear two beeps a second time, hang up and try
again.
Remote Mode
In Remote Mode, if a standard telephone company phone line is being utilized via the Telco
“
IN
”
connection, the consolidator does not need to be programmed. Move on to Programming the
Talkaphone Analog Call Stations.
If a PBX line is being connected to the Telco
“
IN
” port, the consolidator must be programmed for
PBX mode:
1. Call the consolidator (listen for 3 beeps)
2. Enter Guard Access Code: *31**
3. Program the Consolidator for a PBX line: *39*2*
4. Move on to Programming the Talkaphone Analog Call Stations
Local Mode
1. Pick up the built-in handset and select the press the phone line corresponding to the bank of
phones/consolidator to be programmed (listen for 3 beeps)
2. Enter Guard Access Code: *31**
3. Program the consolidator for Local Mode: *37*
4. Move on to Programming the Talkaphone Analog Call Stations
Day/Night Mode
1. Call the consolidator or pick up the built-in handset and select the press the phone line
corresponding to the bank of phones/consolidator to be programmed (listen for 3 beeps)
2. Enter Guard Access Code: *31**
3. Program the consolidator for Day/Night Mode: *63*
4. Program the consolidator to call either:
Local first, then Remote: *35*
Remote first, then local: *36*
5. If a PBX line is being connected to the Telco
“IN” port
enter the PBX code: *39*2*
6. Move on to Programming the Talkaphone Analog Call Stations
