Talis Ultraf Pro, Инструкция по установке и эксплуатации

Страница: 19 / 34

19
Ultraf Basic Control
This section describes the tasks associated with controlling Ultraf Basic Configuration, when no extension card is
used.
Monitoring Screen
The following information regarding Ultraf
connections is displayed:
■
Ultraf Name (1) – the default Ultraf name is
the serial number of the device. This number
appears on the internal side of the control
panel cover (see Product Serial Number and
Data on page 6) .
■
Total Volume (2) – displays the total amount
of water that passed through Ultraf since the
installation date, measured in volume units as
selected in the Settings Screen .
■
Current Flow (3) – displays the current water
flow measured in flow units as selected in the
Settings Screen .
■
Cards (4) – displays the extension card
currently used.
To access the Settings screen, tap the setup icon (5).
The Setting screen appears.
Settings Screen
Configure the following via the Settings screen:
■
Ultraf Name (1) – type descriptive Ultraf
name up to 12 characters. This name is used
as the Ultraf identification.
■
Volume Units (2) – tap the relevant volume
unit of measurement. The selected unit is
marked in blue.
■
Flow Units (3) – tap the relevant flow unit of
measurement. The selected unit is marked in
blue.
Tap the check mark icon (4) to save the settings. The
Monitoring Screen appears.
5
2
1
3
4
4
1
2
3