TALEX Sp. Z O.O. Sp.K.
ul. Dworcowa 9C
77-141 Borzytuchom
tel. (59) 821 13 26.
English mob.: +48 507 828 310
e-mail.
www.talex-sj.pl
User Manual
FastCUT 300 Disc Mower
Page
33
of
56
7.4 Lubrication
Carry out all maintenance and servicing works after you switch off the engine
of the vehicle, release pressure, wait until the rotations stop, and properly
secure both the vehicle and machine.
Avoid contact with oil!
Use personal protective equipment such as protective clothing, footwear,
gloves and glasses.
To ensure the proper operation of the machine, lubricate it thoroughly and properly according
to manufacturer guidelines.
The mower is equipped with ball grease nipples for all main constructional connections,
which
should be lubricated per every 10 hours of work
.
These points are indicated with a sticker. For
lubrication use a hand or foot grease gun filled with solid grease.
Lubricate the PTO shaft after removing it from the machine. Lubricate the telescopic part of the
shaft at least after 8 hours of operation - when the shaft is entirely moved apart and impurities
have already been cleaned.
Check the oil level in the cutter bar and bevel gearbox each time before
starting work.
