TALESUN TP672M-315, Руководство по установке

Страница: 7 / 16

Method B: Clamping installation
· Modules can be installed with clamps. Modules must
be securely attached to the mounting structure with four
clamps on the short frame.
· The modules must be properly secured to their support
so that they can with stand live load condition, including
wind up lift, to the pressure they have been certified for.
It’s the installer’s responsibility to ensure the clampsused
to secure the module sare strong enough.
· The modules are not subject to wind or snow loads exceeding the maximum permissible loads.
· The module clamps which are used must not come in to contact with the front glass and must not deform the
frame. Avoid shadowing effects from the module clamps. Drain holes in the module frame must not be closed
or obscured by the clamps.
· The module installed with clamps on the short frame for 2400 Pa (see the following picture).
Installation manual for crystalline solar photovoltaic modules
7