6
ADSL2+ Router
4.0 Installation & Setup
Follow each STEP carefully and only go to the next step once you have completed the
previous STEP.
Connection of ADSL2+ Router
If you have an ISDN telephone line Connect the router as shown below:
1. Connect the supplied RJ45 Ethernet cable from your PC's Ethernet port to the ADSL2+
Router's “
LAN
” Port.
2. Connect the supplied RJ11 telephone cable from your home's telephone jack to the
“
LINE
” port of the
supplied ATF057 splitter. Connect the other supplied RJ11
telephone cable to the “
MODEM
”
port of the splitter and connect the other end of this
cable to the “
LINE
”
port of your ADSL2+ Router. (If there is no option Splitter, please
connect the supplied RJ11 telephone cable from your home's telephone jack to the
“
LINE
” port of your ADSL2+ Router.)
3. Connect a RJ11 telephone cable to the “
PHONE
” port of the splitter and connect the
other end to the telephone.
4. Connect the power adapter to the power inlet
“POWER”
of the ADSL2+ Router and
turn the “
ON/OFF SWITCH”
switch of your ADSL2+ Router on.
