60
ADSL2+ Router
A.2 Telnet
I cannot telnet into ADSL2+ Router.
STEPS
CORRECTIVE ACTION
1
Check the LAN port and the other Ethernet connections.
2
Make sure you are using the correct IP address of ADSL2+ Router. Check
the IP address of ADSL2+ Router.
3
Ping ADSL2+ Router from your computer.
If you cannot ping ADSL2+ Router, check the IP addresses of ADSL2+
Router and your computer. Make sure your computer is set to get a dynamic
IP address; or if you want to use a static IP address on your computer, make
sure that it is on the same subnet as ADSL2+ Router.
4
Make sure you entered the correct password. The default password is
“1234”.
5
If these steps fail to correct the problem, contact the distributor.
A.3 Web Configuration
I cannot access the web configuration.
STEPS
CORRECTIVE ACTION
1
Make sure you are using the correct IP address of ADSL2+ Router. Check
the IP address of ADSL2+ Router.
2
Make sure that there is not a console session running.
3
Check that you have enabled web service access. If you have configured a
secured client IP address, your computer’s IP address must match it.
4
For WAN access, you must configure remote management to allow server
access from the Wan (or all).
5
Your computer’s and ADSL2+ Router’s IP addresses must be on the same
subnet for LAN access.
6
If you changed ADSL2+ Router’s LAN IP address, then enter the new one as
the URL.
7
Remove any filters in LAN or WAN that block web service.
The web configuration does not display properly.
STEPS
CORRECTIVE ACTION
1
Make sure you are using Internet Explorer 5.0 and later versions.
2
Delete the temporary web files and log in again.
In Internet Explorer, click
Tools
,
Internet Options
and then click the
Delete
Files ...
button.
When a
Delete Files
window displays, select
Delete all offline content
and
click
OK
. (Steps may vary depending on the version of your Internet
browser.)
