1- Wash the hair to make sure it is free from
natural oils and products solution.
2- Completely blow dry the hair thoroughly
before using your Split-Ender PRO.
IMPORTANT:
THE SPLIT-ENDER PRO2
WILL ONLY WORK ON CLEAN AND FULLY
DRY HAIR.
WARNING!
Hair must be FREE from natural
oils, hair spray, gels, mouse or any styling
products on the hair as it will cause the hair
to stick together and it will cause it to be
unevenly trimmed. Always Clean and fully
dry the hair before using the Split-Ender
PRO2. The concept is that a clean and fully
dry hair allows each hair strand to move
freely and INDIVIDUALLY from one another
in order to enter into the blades in a straight
motion and be individually trimmed at the
very ends.
The Split-Ender PRO2 is specially designed
to only trim the very end of the hair strand
which can only enter the blades. It trims
1/4" (6mm) with the 1/4" TRIM Setting
already fixed to the unit.
3- Comb the hair completely free of tangles before using the Split-Ender PRO2 just
to avoid hair pulling. The Split-Ender PRO2 should run through your hair nice and
easy.
HAIR PREPARATION
WASH THE HAIR
BLOW DRY THE HAIR
COMB HAIR FREE OF TANGLE
7
