RECHARGEABLE BATTERY HANDLE
DETACHMENT & INSTALLATION
1- Hold the Split-Ender PRO2 with one
hand at the middle section of the main
unit while holding the Battery Handle with
the other just as shown on Fig. 1.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
2- Now gently rotate the Battery Handle
to the left until you feel a snap. That is
the feel of the Battery Handle unlocking.
(See Fig. 2)
3- Pull the Battery Handle away from the
main unit. It's that simple! (See Fig. 3)
F O R B AT T E RY D I S P O S A L :
T h e
batteries must be removed from the
appliance before it is scrapped. The
appliance must be disconnected from the
supply mains when removing the battery.
The batteries are to be disposed of
safely.
4- You can now see the Battery and Main
Unit contacts. (See Fig. 4)
BATTERY HANDLE INSTALLATION:
To
Install the Battery Handle back in to the
main unit, just repeat the same steps in
reverse.
5
