TALARIA STING TL3000 L1E, Руководство пользователя

Страница: 28 / 56

TALARIA POWER TECH (CHONGQING) CO., LTD.
VIII. Charging and Battery Information
— 25 —
1. The electric motorcycle uses a customized lithium-ion battery charger. Do not use other chargers, or it may cause
battery damage or danger.
2. Check whether the input voltage of the charger is consistent with the grid voltage AC110V/AC230V.
3. The charger output port can be directly inserted into the battery charging outlet on the left side of the electric
motorcycle for charging, or battery can also be charged separately.
4. When charging, the charger and battery charging port must be connected in place before connecting the charger to the
grid socket. After charging, disconnect the charger and grid socket first, and then disconnect the charger and battery after the
indicator light goes out. If you plug the charger into the grid socket first, and then, the charger and battery charging port,
please be sure to complete the operation within 3S. Otherwise, the charger will run the protection, and automatically shut
down because the battery cannot be detected!
5. When the red indicator light of the charger flashes, it indicates that charging is ongoing. When the green indicator light
is on for a long time, it indicates that the battery is fully charged. The time needed to fully charge the battery depends on the
remaining power of the battery and the user's choice of charger. Usually, the stock charger will cost about 4 hours to fully
charge an empty battery.
6. The charger will turn off automatically after the battery is fully charged. But you should always avoid connecting the
charger to the grid socket for a long time, which shall not exceed 6 hours.
7. It is strictly forbidden for users to disassemble the battery by themselves, which may cause damage and danger.
8. When the battery enters deep sleep, it can be awakened with the activating button or by connecting the charger.
25