8
1. Unfold and stretch out the floor onto the bottom of the boat, edging it under
the half-inflated tubes and against the transom. The valve must face upwards.
2. Inflate the floor up to ¾.
3. Finish inflating the boat.
4. Finish inflating the floor.
5. Fully inflate the keel.
ASSEMBLY FOR BOATS WITH WOODEN(AL) FLOOR
NOTE
:
identifying numbers on floor boards must face upwards
.
1. Insert floor board No.1 in bow of boat.
2. Insert floor board No.4 in transom of boat.
3. Insert floor board No.2 into floor board No.1.
4. Insert floor board No.3 into floor boards No.2 and 4 and press down until
flat.
SIDE JOINER ASSEMBLY
1. Inflate the air chambers up to ¾ of their capacity.
