Assembly instructions
Disposal
Version 1.0
Rotary indexer TMF
33 / 35
9
Disposal
Required personal protective equipment
NOTICE
Environmental damage
Improper disposal may result in environmental damage
•
Dispose of components and operating materials in accordance with local regulations
•
Observe the safety data sheets of the operating materials
Materials used
The components are mainly made of the following materials:
•
Copper (complete drive units, electrical cables)
•
Steel and grey cast iron (housings, attachments, shafts, bearings)
•
Plastic (toothed belts, insulation, bearings)
Preparation for disposal
1. Disconnect the system from all power supplies and secure it against being switched on again.
2. Wait 15 minutes until all live components are completely discharged.
3. Disassemble and dispose of assemblies and components in accordance with local environmental regulations.