Takstar XR26, Руководство пользователя

Страница: 63 / 76

3. Chorus
Chorus combines two or more signals, one of which is unaffected, while the pitch of the other
signal changes very slightly over time, resulting in rich and full sound. Chorus is often used to
thicken the soundtrack and increase the texture of the guitar. Chorus can also be used carefully to
thicken vocal tracks.
This product opens the following Chorus parameters for adjustment:
DETUNE:
The pitch deviating from the original signal.
DENSITY:
Adjust the density of the chorus effect. The higher the chorus density, the thicker and
richer the result.
LPF: Low-pass filter. By adjusting the cut-off frequency of the low shelf filter, it can reduce the
high frequency content, and frequencies higher than this value will be filtered / deleted.
HPF: High-pass filter frequency. It cuts low frequencies and reduces "rumbling" and
unwanted turbidity.
4. Ename / Flanger
The flanger effect adjusts the pitch of the delayed sound to make the sound shake up and down and
produce a noise, and make the sound more fluctuant. The general principle of the flanger effect is to
add a feedback loop to the chorus effector, and generate a comb filtering effect by superimposing
the original signal and the changing feedback signal, so as to achieve the subjective feeling of
flanger.
This product opens the following Enamel / Flanger Flange parameters for adjustment:
SPEED: It refers to the modulation speed. It is mainly used to adjust the changing speed of the
flanged vibrato.
DEPTH: It refers to the modulation depth. It is mainly used to adjust the changing range of flanged
vibrato.
DELAY: Delay. It is used to adjust the delay time between the effect sound and the original sound.
PHASE: It is used to adjust the phase difference between the feedback sound and the original sound.
FEED: The amount of feedback. The larger the value, the more obvious the flanger effect.
DIRECT: Direct sound. It is used to adjust the volume of the direct sound in the effect sound.
62