Takstar XR26, Руководство пользователя

Страница: 50 / 76

This product includes a professional monitor selection system. The built-in monitor bus of the
mixer sends signals to the MONITOR PHONES headphone monitor socket on the panel and the
MONITOR OUTPUT speaker monitor socket on the back panel. You can obtain the signal of the
monitor bus through these sockets.
You can add the corresponding channel to the monitor bus through the SOLO button on the mixer
panel. At this time, the main output level meter on the upper right side of the panel will become the
monitor bus level meter, and the CLEAR button below the level meter will change to red, indicating
that there are channels enabling SOLO monitoring. You can select SOLO’s pre-fader (PFL) / post-
fader (AFL) signals on the MENU-MONITOR page. Channel Solo corresponds to the input channel
and BUS Solo corresponds to the output channel.
All input channels (MIC / LINE / SPDIF / AESEBU / STEREO / PLAY, etc.) can be enabled with the
SOLO function to join the monitor bus, and all output
channels (BUS / MASTER) can also be enabled with the SOLO function to join the
monitor bus; however, the input channels and output channels cannot be added to join
the monitor bus together.
When there is no channel to enabling the SOLO function, you can select the
default channel sent to the monitor bus on the MENU-Monitor page.
Monitoring Settings
49