Features:
Specification:
Frequency Response Graph:
Connecting and disconnecting the microphone
cable:
1. Insert the XLR connector into the microphone. If necessary, rotate
the connector to align the key on the connector and the groove
in the microphone. Push the connector into the microphone until
it clicks.
2. To disconnect the cable and microphone, grasp the connector
while depressing the tab. Pull the connector away from the
microphone.
Usage:
1. For the best Gain-before-feedback and isolation from undesired
background noise, aim the microphone, toward the sound resource
and away from undesired sound resource.
2. Do not cover any part of the grille with your hand, covering the
grille alters the sound and distorts the polar pattern increasing
the chance for feedback.
1. If the head of the microphone is covered by hand or brought close
to the speaker, a howling sound may be generated. To prevent this,
first decrease the volume, then place the microphone so that it is
not pointed to the speaker and that there is a sufficient distance
between the microphone and speaker.
2. It is important to keep foreign particles out of the grill and the
windscreen because they may alter the frequency response of the
microphone. The grill shall be periodically cleaned using warm,
soapy water, rinsed with plain water and let dry before replacing.
3.
4. To maintain the sensitivity and quality of sound reproducing, avoid
exposing it to moisture and extreme temperatures.
Due to the high sensitivity of the cartridge, do not drop it from
high or apply strong shock to it.
Cautions:
Loudspeake
r
Microphone
Sound
Source
International Sales Department
Tel: +86 752 6383644 Fax: 86 752 6383952
Address: No. 2 Fu Kang Yi Rd., Longxi Boluo Huizhou, Guangdong 516121, China
Website:
www.takstar.com
E-mail: [email protected]
DYNAMIC MICROPHONE
• Wide frequency response, clear & bright vocal
• Rugged metal housing
• Mute switch for convenient operation
• Dual core shield cable supplied for anti-interference
• Transducer Principle: Dynamic
• Directivity Characteristic: Cardioid
• Frequency Response: 50Hz~16kHz
• Sensitivity: -55dB ± 3dB (0dB=1V/Pa at 1kHz)
• Output impedance: 400
Ω
± 30% (at 1kHz)
• Net weight: 325g
This model is the flagship in all TAKSTAR
dynamic microphones. It is a unidirectional
dynamic vocal microphone designed for
professional vocal use in live performance ,
sound reinforcement, and studio recording.
A cardioid pickup pattern isolating the main
sound source has a tailored vocal response
for a sound which has reached the current
world standards, rugged construction, a
proven internal shock mount system, and a
steel mesh grill, all of these permit a consis-
tent performance even with rough handling.
The high performance low cost product is
your best choice.
s
For additional information about service or parts, please contact
your local authorized takstar service center or visit takstar at www.
takstar.com
*
Frequency in Hz
R
ela
tiv
e R
esponse in dB
0
30
60
90
120
150
330
300
270
240
210
180
PROFESSIONAL
