Takstar PH 130, Руководство пользователя

Страница: 16 / 20

15
PH 130
Smart Phone Microphone
Trouble Shooting
A. LED does not light up after the microphone is turned on.
1. Check if the microphone has sufficient power supply, try to recharge it, and
then use it.
B. No sound when playing music
1. Check if the microphone has connected with the cell phone successfully.
2. Check if the earphone has correctly connected with the microphone connector.
3. Check if the cell phone has normal sound, or exit the software then turn it on
to play again, then check the result.
4. Check if the cell phone volume has been decreased, try to increase the cell
phone volume, and then check the result.
C. The microphone sound cannot be monitored
1. Check if the microphone has connected with the cell phone successfully.
2. Check if the microphone is turned on.
3. Check if the microphone volume is too low, try to increase the volume, and
then check the result.
D. The recorded sound has no reverb effect
1. Check if wet listening & dry recording mode has been set, if yes, the recorded
sound has no reverb.
2. If the cell phone connection cable has been connected with accompaniment
input connector, this leads to that the recorded sound has no reverb.
Disconnect the connection cable and then restart the cell phone.
E. The microphone sound cannot be recorded or too low volume
of the recorded sound
1. Check if the audio cable has been connected with accompaniment input, it
cannot record the sound of Microphone. It just records the build-in microphone
sound of the cell phone.
2. Check if the microphone volume is too low, try to increase it, and then check
the result.
3. Check if the cell phone volume is too low. The recorded volume increases after
the cell phone volume increased.
4. Check if the microphone volume of the recording software is too low, adjust
the volume and then check the result.