Takstar MX630, Руководство пользователя

Страница: 35 / 56

① Power switch:
Pressing it for 2 seconds to turn on/off the sound card.
② Power connector:
Connect adapter to provide power supply for the sound card. Please use
standtrd one. If it is not the standard one, please pay attention to the
specification: DC 12V 1A, the outer ring of the connector is -, and the internal is +.
③ LINE OUT L/R：
Connect speaker cabinet via Φ 6.35mm connection cable. This connector links
with Φ 6.35mm connector (bal/unbal). There are two ways for the monitor
speaker cabinet to connect with this connector: bal TRS and unbal TS. Bal signal
provides better noise rejection and is the best choice. Especially, the cable is
longer than 6m. According the standard, the wiring are as below, designated by
AES:
Bal TRS（Φ6.35mm）
Hot（＋）tip
Cold ring
Shield (ground) sleeve
BAL TRS connector
Rear panel
34
① ② ③
④
⑤ ⑥