background image

We appreciate your purchase of a TAKEX passive infrared sensor.  This sensor will provide long and dependable service when properly 
installed.  Please read this Instruction Manual carefully for correct and effective use.

Please Note

 : This sensor is designed to detect intrusion and to initiate an alarm ; it is not a burglary-preventing device. 

                        TAKEX is not responsible for damage, injury or losses caused by accident, theft, Acts of God (including inductive     
                        surge by lightning), abuse, misuse, abnormal usage, faulty installation or improper maintenance.      

Instruction Manual

 OMS-12FE

This product is a passive sensor that can be used both indoors and outdoors, and that detects the far infrared radiation given off by body heat.  
Using this sensor with other products enables a variety of applications, such as giving notifications of visitors or waring in the detection of intruders.

Main Features

[

3

 DETECTION AREA]

[

4

 FUNCTION]

(2) Selection of area corresponding to intended 
      purpose

(1) Dual Zone system

(3) Rainproof housing

(4) Back Tamper

Use of the provided back tamper rubber enables detection of 
interference with the sensor, such as attempts to remove it 
from the mounting surface.

[

7

 INSTALLATION]

(5) Support for mounting on poles 
     

 (optional pole attachment)

Use of the optional pole attachment enables mounting on 
poles with a diameter of 1.49" to 1.77" (38mm to 45mm).

s5SINGTHEINCLUDEDAREAMASKINGSHEETENABLESPARTIAL

  masking of zones for which detection is not required.

 IEC standard: IP54 compliant.

Approximately 180°

 

φ

1.49" to 1.77" 

(38mm to 45mm)

Downwards zone

 Horizontal zone

Detected

Detection range

Not detected

Dual Zone Outdoor PIR

s4HESENSORWATCHESA

wide, 180° angle, meaning 
that a single unit can 
cover a wide range.

s4HISSENSORISEQUIPPEDWITHA$5!,:/.%SYSTEM

which initiates an alarm only when detection occurs in 
both the horizontal and downward zones simultaneously. 
This prevents false alarms for distant automobiles or for 
small animals.

s"YCHANGINGTHEANGLEOFTHEDOWNWARDSZONEITIS

POSSIBLETOCHANGETHEDETECTIONDISTANCE$ISTANTVEHICLES

that do not enter the downwards zone are not detected.

Small animals that do not enter the horizontal zone are 

not detected. Similarly, birds and other objects that only 
enter the horizontal zone are also not detected.

s!ªZONEEITHERTOTHELEFTORRIGHTCANBEDISABLED

Содержание OMS-12FE













Отзывы: