②
Accessory
6HOIWDSSLQJVFUHZ
SFV
$UHDPDVNLQJVKHHW
SFV
)ROGHGDQGVWRUHG
LQVLGHWKHFRYHU
&RYHU
/HQV
2SHUDWLRQ
/('
&RYHU/RFNLQJVFUHZ
0RGHVHWWLQJ%
'LVWDQFH
DGMXVWPHQW
OHYHU
:LULQJKROH
0RXQWLQJKROH
0RXQWLQJKROH
Loosen the cover locking screw and remove the cover.
(6) Fix the sensor using the supplied screws.
[Embedded wiring ]
(1) Align the back of sensor with the wiring from the wall.
(2) Feed the wiring through the wiring hole and connect it to the terminals.
(3) Use sealant and caulk the gap around the wiring.
[External wiring ]
(1) Break off the desired knockout before wiring.
(2) Feed the wiring through the wiring hole and connect it to the terminals.
(3) Use cable conduit and joint boxes to cover the wiring.
(4) Use sealant to caulk the gap around the wiring.
(5) Select Active or Inactive back tamper by reversing the rubber switch cover.
$FWLYH)DFWRU\VHW
,QDFWLYH
%DFN7DPSHU
Make sure that sealant is used to caulk the
wiring hole and gaps.
%DFNWDPSHU
7HUPLQDOV
.QRFNRXW
.QRFNRXW
3-1
Before mounting
3-2
Wall mount
0RGHVHWWLQJ$
WRP
WR
',3VZLWFK
',3VZLWFK
3$576'(6&5,37,21
,167$//$7,21
