⑦
Model
MX-12FAMD
Detection system
Passive infrared
and Microwave
Detection area
Horizontal detection
Angle : 180°, Detection distance : 12m(40')
Horizontal zone : 14 zones Downward zone : 14 zones
PIR Area adjustment
Detection distance : 2 to 12m(10' to 40') [10 ranges]
(by adjusting vertical angle of downward curtain)
Supply voltage
9 to 28V DC (non-polarity)
Current consumption
Alarm output (1)
Alarm output (2)
40mA max.
ALARM RIGHT+LEFT
ALARM RIGHT
ALARM LEFT
EXTERNAL OUTPUT
Tamper output
Dry contact relay output N.C.
Contact capacity : 30V (AC/DC) 0.1A max.(Resistive load)
Trouble output
Dry contact relay output N.C.
Contact capacity : 30V (AC/DC) 0.2A max.(Resistive load)
Operation LED
Red LED
・
Warm-up (Blinking)
・
Alarm detection (Lights approx.2sec only for Walk test)
・
Low supply voltage (Blinking slowly)
・
Masking detection (Blinking rapidly)
・
Self diagonosis error (Lights continuously)
Dry contact relay output N.C./N.O. selectable
・
Contact capacity : 30V (AC/DC) 0.2A max. (Resistive load)
・
Contact operation : Detection time (+2sec.)
Dry contact relay output N.C./N.O. selectable
・
Contact capacity : 30V (AC/DC) 0.2A max. (Resistive load)
・
Contact operation : Detection time (+2sec.)
Dry contact relay output N.O.
・
Contact capacity : 30V (AC/DC) 0.2A max. (Resistive load)
・
Contact operation : Detection time (+30sec. latch time)
Pulse count
1 / 3 times (selectable with DIP switch)
PIR sensitivity adjustment
60% / 80% / 100% / 120% (selectable with DIP switch, left and right sensors individually)
Functions
Anti-masking, Microwave environment, Back tamper, Trouble alarm, Low voltage monitoring
Anti-masking Environmental level
Connection
Terminals
Ambient temperature
-25°C to + 60°C (-13°F to + 140°F)
Mounting position
Indoor / Outdoor
Ingress protection
IP55 (Wall mount)
Weight
400g (14.2oz)
Optional
Pole attachment : BP-32
Appearance
Body : resin (white) / Lens : resin (white)
left and right adjustment individually possible
(Cover tamper / Back tamper (when enabled))
(Masking detection / Low supply voltage / Self diagonosis error)
※
Specifications and design are subject to change without prior notice.
Short / Long
Microwave
range adjustment
Green LED
・
Microwave alarm detection
(Lights max.2sec only for Walk test)
Microwave transmit
frequency and power
24.150 to 24.250GHz 12.7dBm e.i.r.p
(selectable with DIP switch, left and right sensors individually)
MAINTENANCE
1. Clean the device with a soft, damp cloth and wipe off water drops. Use water with weak neutral detergent to clean stubborn
dirt. (except lens)
Do not use substances such as thinner or benzene.
2. Perform operation check on a regular basis.
63(&,),&$7,216
