Takeuchi TB53FR, Руководство по ремонту

Страница: 255 / 447

HYDRAULIC UNITS
SLEW MOTOR
IV-145
TB53FR
16. Mount the carrier 1 (7).
17. Mount the inner race (5), needles (6) and plan-
etary gear A (4) on the carrier 1 (7).
• Mount the planetary gear A as shown in the
figure.
18. Mount the drive gear (3).
19. Mount the thrust plate (2).
• Measure the depth (A) from the case end to the
carrier 1 and select a proper thickness for the
thrust plate by referring to the table.
• The largely-rounded side of the thrust plate
circumference should face the planetary gear.
Slew Motor
1. Unite the hydraulic motor (1) and the reduction
gear (2) and fix them with the cap screws.
Cap screw: 128
±
7 N·m
Depth (A) Less than 14.0 mm
From 14.0 to less
than 14.5 mm
14.5 mm or more
Thrust plate
thickness
1.8 mm 2.3 mm 2.8 mm
K3D627
2
1