Takeuchi TB53FR, Руководство по ремонту

Страница: 197 / 447

HYDRAULIC UNITS
CYLINDERS
IV-87
TB53FR
c. Since the slipper ring (51) is extended when it
is installed, correct it using the corrective jig
(E).
2. Install the wear ring (27).
a. Spread the wear ring (27) at the cut portion the
minimum amount necessary, installing it on
the piston from the shaft direction.
Piston (in two pieces)
1. Install the back ring (30), the backup ring (31),
and the slipper ring (32) on the piston (13).
2. Install the wear ring (11) on the piston (13) and
the packing holder (5).
• Widen the cut part of the wear ring (11) only as
far as required, and install it from the axial
direction on the piston.
E5D432
13
30 31 32 31
5
E5D415
12
11
13
5