Takeuchi TB53FR, Руководство по ремонту

Страница: 192 / 447

HYDRAULIC UNITS
CYLINDERS
IV-82
TB53FR
5. Pull the piston rod assembly out of the tube.
• Use a wooden block (1) so as not to scratch the
sliding surface, and pull the assembly straight
out.
Piston Rod Assembly
1. Fasten the piston rod assembly securely in a level
position.
2. Remove the piston.
a. Take out the set screw (2) and remove the steel
ball (3).
• The set screw is staked at 2 places with a
punch, so grind off the staked portions using
a hand drill.
b. Loosen the piston nut (6) and remove it.
• Use a wrench with a hydraulic jack (5).
3. Remove the cushion bearing (7) and spacer (8).
4. Remove the cushion bearing.
a. Remove the snap ring (9).
b. Move the cushion bearing (10) and remove the
stopper (11).
c. Pull out the cushion bearing (10).
d. Remove the cushion seal (12).
J1D407
5
6
J1D406
2
3
10
9
6
7
8