Takeuchi TB260, Руководство оператора

Страница: 67 / 305

2-17
CONTROLS
MULTI-INFORMATION DISPLAY
WARNING LAMPS
IMPORTANT: If a warning lamp flashes
and an alarm is sounded, immediately
stop all operations and check the
corresponding component.
Refer to “If a warning lamp flashes” on
pages 6-10 and 6-11.
1. ECM error warning lamp <Applicable
machine models 126100003 or later>
This warning lamp flashes if the Electronic
Control Module (ECM) detects an engine
problem while the starter switch is in the
ON position. The problem detected is
recorded as an ECM error.
Refer to “Engine error code list” on pages
6-14 to 6-21.
1-1. Vehicle and engine emergency lamp
This lamp is displayed enlarged for one
second, and then flashes and an alarm
sounds if there is a problem with the
machine. Go to the (7) error code
display from the Menu screen, get the
vehicle or engine error code number,
and consult your sales or service dealer
referring to the “Vehicle error code list”
or “Engine error code list” in this
manual.
Refer to “Menu screen” on page 2-22.
Refer to “(7) Error code display” on
page 2-25.
Refer to “Vehicle error code list” on
pages 6-12 to 6-13.
Refer to “Engine error code list” on
pages 6-14 to 6-21.
2. Battery charge warning lamp
This lamp flashes and an alarm is sounded
if a problem rises in the charging system
while the engine is running.
3. Engine oil pressure warning lamp
This lamp flashes and an alarm is sounded
if the lubricant oil pressure abnormally low
while the engine is running.
4. Water separator warning lamp
This lamp flashes if the water is detected
within the water separator while the starter
switch is in the ON position.
5. Coolant temperature warning lamp
This lamp flashes and an alarm is sounded
if the engine coolant temperature
becomes abnormally high while the engine
is running.
6. Air cleaner warning lamp
This lamp flashes and an alarm is sounded
if the air cleaner filter is clogged while the
engine is running.
7. Fuel filter warning lamp
This lamp flashes and an alarm is sounded
if the fuel filter is clogged while the engine
is running.
8. Fuel level warning lamp
This lamp flashes when the fuel level is low
while the starter switch is in the ON
position.
9. Third auxiliary hydraulic warning lamp
This lamp starts flashing and an alarm
sounds if the fixed side (left “e”) pressure
of the auxiliary 3rd drops abnormally while
the engine is running, or while the quick-
hitch is being removed or installed.