manualshive.com logo in svg

Takeuchi TB260, Руководство оператора

Поделиться
Скачать
Takeuchi TB260 Скачать руководство пользователя страница 19

1-9

SAFETY

Check the strength of the bridge

When traveling over a bridge or a structure, 

check the permissible load. If the strength is 

insufficient, reinforce the bridge or the 

structure.

Always keep the machine clean

• Clean windows, mirrors and lights to 

ensure good visibility.

  Adjust the mirror to the best position for 

the operator to see the rear view (blind 

spot) from the operator’s seat.

• Wipe off any oil, grease, mud, snow or ice, 

to prevent accidents due to slipping.

• Remove all loose objects and unnecessary 

devices from the machine.

• Remove any dirt, oil or grease from the 

engine area to prevent fires.

• Clean around the operator’s seat and 

remove any unnecessary object from the 

machine.

PRECAUTIONS WHEN PREPARING

Содержание TB260


















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды