manualshive.com logo in svg

Takeuchi TB260, Руководство оператора

Поделиться
Скачать
Takeuchi TB260 Скачать руководство пользователя страница 100

2-50

CONTROLS

AUXILIARY 1ST SWITCHES

Auxiliary hydraulic buttons

SWITCHES

Press those buttons to control the flow of the 

oil in the first auxiliary hydraulic lines.

• Proportional control of the auxiliary 

hydraulic circuit is not possible.

(A) .......Hydraulic oil flows to the left auxiliary 

line (a).

(B) ......Hydraulic oil flows to the right auxiliary 

line (b).

Slider switch

(Proportional control)

Proportional control allows for slow-to-fast/

fast-to-slow movement of attachment.

Example: If you move the slider switch half 

way, the attachment will move at 

approximately one-half the speed.

Move this switch to control the flow of the oil 

in the first auxiliary hydraulic lines.

(A) .......Hydraulic oil flows to the left auxiliary 

line (a).

(B) ......Hydraulic oil flows to the right auxiliary 

line (b).

Refer to “Auxiliary hydraulic lines (If 

equipped)” on pages 2-76 to 2-80.

AUXILIARY 2ND/4TH SWITCH  

(IF EQUIPPED)

Slider switch

(Proportional control)

Proportional control allows for slow-to-fast/

fast-to-slow movement of attachment.

Example: If you move the slider switch half 

way, the attachment will move at 

approximately one-half the speed.

Move this switch to control the flow of the oil 

in the second auxiliary hydraulic lines.

(C): .....Hydraulic oil flows to the left auxiliary 

line (c).

(D): .....Hydraulic oil flows to the right auxiliary 

line (d).

To use the auxiliary 4th hydraulic line, press 

the auxiliary 2/4 select button to change to 

the operation of the auxiliary 4th.

Refer to “Auxiliary hydraulic lines (If 

equipped)” on pages 2-76 to 2-80.

Содержание TB260


















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды