Takeuchi TB108, Руководство оператора

Страница: 90 / 170

88
MAINTENANCE
Service Data
Fuel and Lubricant Chart
Use different fuels, lubricants and greases according to the temperature, referring to the
chart below.
¡
Change the lubricant earlier than as shown in the table if it is extremely dirty or its
performance has deteriorated severely.
¡
Whenever possible, use the same brand of lubricant as before. If changing with a different
brand, replace the entire quantity – do not mix different brands.
* For water, use tap water (soft). Do not use well or river water.
** When the ambient temperature drops below 0
°
C, add coolant (antifreeze). Follow the
coolant manufacturer’s instructions to determine the mixture ratio.
Part
Type
Type by temperature
-22 -4 14 32 50 68 86 104
°
F
-30 -20 -10 0 10 20 30 40
°
C
Replacement
interval
Capacity
R
(US. qt.)
Engine oil
pan
Diesel
engine oil
API - CD
After first 50
hrs.
Every 250 hrs.
Upper limit:
1.7 (1.8)
Lower limit:
1.0 (1.1)
System: 14
(3.7 U.S.gal)
Tank: 7.3
(1.9 U.S.gal)
Hydraulic
tank
Antiwear
hydraulic oil
Every 2000 hrs.
Use a clean, Quality fuel for good performance and optimum engine life.
¡
To prevent fuel flow problems in cold weather, use diesel fuel with a pour point of
at least -12
°
C (10
°
F) below the lowest expected ambient temperature.
¡
Minimum cetane number is 45. Low temperature or high altitude operation may
require the use of fuel with a higher cetane number.
Fuel tank Diesel fuel
Tank: 8
(2.1 U.S.gal)
Engine
cooling
system Coolant
(water * +
coolant **)
Every 1000 hrs. 2.8 (3.0)
SAE 5W-20
SAE 10W-30
SAE 15W-40
Travel
reduction
gear
Gear oil
API-GL-4
SAE 90
After first 250
hrs.
Every 1000 hrs.
0.33 (0.35)
each
Slew motor
pinion
Slew
bearing
Working
equipment
Levers
Lithium
based
grease
EP-2
NLGI No. 2
Every 50 hrs.
Every 50 hrs.
Daily or every
10 hrs.
When required
As
required
ISO VG32
ISO VG46
ISO VG68
50% coolant mixture
30% coolant mixture