Takeuchi TB014, Руководство оператора, Страница: 53 / 214

51
CONTROLS
Blade Lever
Use this lever to operate the dozer blade and
for TB016 switch the crawler width.
(A) .... Blade up/narrow crawler width
(B) .... Blade down/wide crawler width
To change the crawler width, press the
selector lever in before operating it.
Travel Levers
WARNING
Before operating the travel levers, check
to make sure that the dozer blade is to
the front of the operator’s seat. BE
AWARE that when the dozer blade is to
the rear of the operator’s seat, the travel
levers operate in the opposite direction
to when the dozer blade is in the front.
Use these to move forward and backward
and to change directions.
Refer to page 71 “Operating the Travel
Levers” .
Selector Lever (TB016)
Use this lever when changing the crawler
width. This lever switches the operation of
the blade and span cylinders.
1. To change the crawler width, press this
lever in, then move the blade lever and
change the crawler width.
Pedal Locks
WARNING
When not using the pedals, set the pedal
locks to the locked position. Stepping on
a pedal accidentally when it is not locked
may lead to unexpected accidents.
These devices are for locking the swing and
auxiliary pedals.
Set the pedal locks over the pedals to lock
them.
Levers and Pedals
C4B026
C4B024
C4B023
B A