COPY
‑ 2 ‑
Jul./20/ 10
No.
Part Name
Qty
Repair Part Item No. In packs of
1
FI Controller Assembly
1
2
FI Controller panel (bored switch)
1※
3
FI Controller panel (transparent switch)
1
4
Rubber cap
1
00-05-0045
1
5
Sub wire harness 1 COMP.
1
00-05-0041
1
6
Sub wire harness 2 COMP.
1
00-05-0042
1
7
Ground wire
1
00-05-0043
1
8
Velcro set
1
00-00-0150
1
9
Insulation lock, 150 mm
2
00-00-0135
10
00-05-0044
1
◎
Please be informed that, mainly because of improvement in performance, design changes, or cost increase, the product specifications and prices are
subject to change without prior notice.
◎
This manual should be retained for future reference.
〜
Kit includes
〜
〜
Product & Parts Names
〜
FI controller
Rotary switch
Red LED
Green LED
Harness for FI controller
１、２
４
３
５
９
７
８
６
・
When you notice something abnormal with your motorcycle, stop riding immediately and park your motorcycle in a safe place to avoid an accident.
・
Before working, place the motorcycle on level ground to stabilize its position for safety to avoid the motorcycle overturning.
・
Please conduct checkups and maintenance correctly referring to the instructions and methods described in the instruction or service manual.
(Improper checkups and maintenance could lead to accidents.)
・
If you find damaged parts when inspecting or performing maintenance of your motorcycle, do not use these parts, and replace them with new ones.
(The continued use of these damaged parts could lead to accidents.)
・
Keep plastic bags for packing the products out of children’s reach, or discard them.
(If children get them on, there will be a danger of their suffocating.)
The following show the envisioned possibility of human death or serious injuries to human bodies as a result of disregarding the
following cautions.
WARNING
・
Please drive safely and follow the local traffic laws.
・
Work only when the engine and the exhaust system are cool to avoid burns.
・
Prepare appropriate tools and work properly to avoid the breakage of parts or injuries.
・
Always use a torque wrench to tighten bolts and nuts securely to the specified torque to avoid these parts getting damaged or loose.
・
As some products and frames have sharp edges or protruding portions, work with your hands protected to avoid injuries.
・
Before riding, always check such parts as screws for loose.
If you find loose ones, screw them securely up to the specified torque to avoid parts coming off.
The following show the envisioned possibility of injuries to human bodies or property damage as a result of disregarding the
following cautions.
CAUTION
※
The FI Controller panel of Item No. 2 above with a bored switch is factory-installed onto
the FI Controller assembly of Item No.1.
Please order repair parts with the Repair Part Item No.
Without the repair part item No., we may not be able to provide the correct parts.
Some parts are only available as a set. Please order them with the set number.
