TAKEBISHI MITSUBISHI ELECTRIC MELSEC iQ-R Series, Руководство пользователя

Страница: 43 / 62

8 Omron Connection
8.2 Parameter Settings
41
8
8.2
Parameter Settings
This section shows the parameter settings for Omron Connection in MES Interface Function Configuration Tool.
For details on MES Interface Function Configuration Tool, refer to the following:

MELSEC iQ-R MES Interface Module User's Manual (Application)
Access target device setting
The following shows the setting of an access target device accessed from an MES interface module.
Window
1.
Click "Target Device Settings" in the edit item tree.
2.
Click the [Edit] button in "Target Device Setting List".
Displayed items
*1 A value set for this item is not used when "TCP/IP" is selected for "Protocol".
Item Description
Device Type Select "OMRON(SYSMAC)".
Protocol Select "TCP/IP" or "UDP/IP".
MES Interface Module Setting Port No. Set the port number of an MES interface module (0, or 1024 to 65535).
If setting '0', a free port is automatically set.
Network No. A value set for "Network No." in "SYSMAC-PLC Setting" is automatically set.
Node No.
*1
When selecting "UDP/IP" for "Protocol", set the node number of an MES interface
module (0 to 255).
Set it based on the following:
• Fourth octet of the IP address of an MES interface module
• Routing table set for a SYSMAC-PLC
Unit No. Set the module number of an MES interface module (0 to 255).
Normally, set '0'.
SYSMAC-PLC Setting CPU Type Select the CPU type of a connection target SYSMAC-PLC.
IP Address Set the IP address of a SYSMAC-PLC.
Port No. Set the port number of a SYSMAC-PLC (0 to 65535).
Network No. Set a network address set for an Ethernet communication module of a SYSMAC-PLC
(0 to 255).
Node No. Set the node number of a SYSMAC-PLC (0 to 255).
Set it based on the following:
• Fourth octet of the IP address of a SYSMAC-PLC
• Routing table set for a SYSMAC-PLC
Unit No. Set the module number of an access target (0 to 255).