60
of the connection arms. The connection hooks have
been correctly unlocked if you can see a red marking
on the top of each release element.
If green markings are shown, both, or in case of
partially green markings possibly only one of the hooks
are still locked in place. Please always also see the
warnings in Section 5 – Use in the vehicle (Securing
the TAKATA MINI I-SIZE).
4. SECURING YOUR CHILD
NOTE!
For safety reasons, children should always get in and
out from the passenger side of the vehicle, or directly
onto a sidewalk.
Step 1 – Adjust and fasten the inner padding and straps
Before sitting your child in the TAKATA MINI I-SIZE,
Step 4 – Unlock the ISOFIX connectors
[MINI_I-SIZE_033] Unlock the left and right-hand
ISOFIX connectors, by taking hold of the release
sliders on each, moving the locking sliders of the
release sliders down and, at the same time, pulling the
release sliders towards the support leg. The connectors
have been correctly unlocked if you can see a red
marking on the top of each slider. If green markings
are shown, the connectors are still locked in place.
Releasing the rear connection hooks
[MINI_I-SIZE_034] The TAKATA MINI I-SIZE is
attached to the TAKATA I-SIZE BASE via connection
hooks at the front and rear. To free the TAKATA MINI
I-SIZE from the TAKATA I-SIZE BASE, you need
only to release the rear hooks.
The rear hooks unlock together, so you only need to
push down one of the release elements on the exterior
