TAKASAGO HX-S-G2 Series, Инструкция по эксплуатации

Страница: 62 / 240

Useful Function
62
The approximate time of high speed, medium speed, and low speed is as follows:
- CV High Speed: Approx. 10 msec - CC High Speed: Approx. 10 msec
- CV Medium Speed: Approx. 100 msec - CC Medium Speed: Approx. 100 msec
- CV Low Speed: Approx. 200 msec - CC Low Speed: Approx. 200 msec
The approximate time of high speed, medium speed, and low speed is as follows:
- CV High Speed: Approx. 100 msec - CC High Speed: Approx. 10 msec
- CV Medium Speed: Approx. 300 msec - CC Medium Speed: Approx. 100 msec
- CV Low Speed: Approx. 500 msec - CC Low Speed: Approx. 200 msec
③
Rising time of voltage and current during STEP control depends on programming time of output specification.
Actual waveform will be the following image when the programing time (e.g. Model: 500V type and CV low-speed: 500ms)
is longer than control time (e.g. 0.1s). Please take note that the waveform dose not rise vertically regardless of
programing time and control time.
Step 1
Step 2
Number of repetition
: Second
Number of repetition
: Third
(V
o
lta
g
e
/C
u
rr
e
n
t)
(Elapsed time)
Set waveform
Actual waveform
STEP control
Rising time
Step 1 Step 2
Image of waveform when programming time is longer than control time
Please refer to the following table for programming time.
The programing time of DC power supply except for the model with F option is
fixed as low-speed .
It is required to purchase the model with F option to set high-speed rising for voltage and current during STEP control.
Please refer to Startup Mode Selection (page 50) and set the desired time.
MEMO (400V/500V/1000V)
MEMO (30V/60V/120V)