Takara Belmont ZEN MIRROR, Инструкция по установке/эксплуатации

Страница: 9 / 16

9
Before installation
・Before installing, refer to the product dimensions on pages 6 to 8 and to decide the best mount-
ing position.
・In the case of the wall mounted version, the wall surface requires at least a 12 mm thick concrete
panel.
・In the case of plaster boards or plywood boards of 12 mm or less, please
reinforce them by inserting the girder at the wall fixing screw position. Please
ensure that 2 sets per dryer holder , combining M5 x 20 pan head screws and
M5 hex nuts as shown on the right.
Required tools
・8mm Spanner ・(+) Phillips screwdriver
M5 hex nut
M5×20 pan head screw
①dryer holder
②
②
②
④
⑤
⑤
⑤
lower frame
slide table
⑥adjuster
⑥adjuster
③
①
mirror frame
top board
cord rail
rubber for slide table
<Single-sided free-standing / double-sided free-standing >
①Attach the dryer holder referring to page 11.
②Insert the mirror frame into the lower frame and fix it
firmly with M6 countersunk screw.
③Attach the cord rail to the lower frame with 2x M4 truss
screws. (Only for double-sided free-standing )
④Attach the rubber for slide table to the top board with M4
pan head screw. Then attach the slide table to the top
board with 4x M6 truss screws.
⑤Attach the top board to the lower frame with 4x M6 truss
screws.
⑥Turn the adjuster to make the top board horizontal and
to prevent rattling.
Installation