Takara Belmont ZEN MIRROR, Инструкция по установке/эксплуатации

Страница: 10 / 16

10
<single-sided wall mounting>
center line
wall hook metal
lower frame
200
67
0
15
75
200
225
225
250
250
323
323
15
40
82
0
655
adjuster
Attach the lower frame to the wall as shown in the figure below and temporarily fix with 3x screws as shown.
Use the adjuster to make the top of the lower frame horizontal. Then tighten the 3x screws firmly.
The factory default position of the adjuster is the lowest position of the product.
The height range of the adjuster is 14 mm, this means the height can be adjusted up to 14 mm.
The figure shows the dimension that the adjusters are 7mm higher from the lowest position (midway
position).
Hold the wall hook metal horizontally and fix it with 3x tapping screws provided at the position shown .
After that, fix the dryer holder, the mirror frame, the sliding tray, the top board with the provided screws the
same way as the free-standing type in page 9.
fixing screws